![]() NetworX Wireless LCD Display Keypad User Manual. It is compatible with all NetworX control panels. ![]() The NetworX wireless LCD display keypad is an integrated 48-Zone wireless receiver LCD keypad with traditional design and an easy-to-read, customizable display. Up to 32 modules can be added to expand the capabilities of the NX-8. The NetworX design allows a fully loaded system to be housed in one single metal enclosure, establishing for the first time, a logical solution and design response to modular systems. Drawing on experience in the world market as the largest exporter of USA manufactured controls, CADDX has developed the most flexible, durable, and user-friendly control ever seen in our industry.įeaturing sophisticated software which allows up to 99 users to interface with 48 zones, 8 partitions, and a host of integrated fire, access, verification, and input/output modules, all reported with the most comprehensive and fast SIA and Contact ID formats. Turns light 4 ON and makes Installer Code a Master Code)ħ.The NetworX NX-8 from CADDX Controls represents a new approach to security systems design. (STAY CHIME EXIT BYPASS CANCEL, SERVICE, ARMED turns ON) (If incorrect Install code entered STAY/CHIME/EXIT/BYPASS/CANCEL will continue flashing) (STAY/CHIME/EXIT/BYPASS/CANCEL lights flash, SERVICE turns ON) (STAY/CHIME/EXIT/BYPASS/CANCEL lights will flash) Press # to exit or if partitioned system press * once and see below (Zone lights show Authority Level, toggle lights ON or OFF by pressing 1 to 7)ġ = Reserved, do not use 2 = Arm Only Code (Babysitter Code) 3 = Arm Only after Closing 4 = Master Arm/Disarm (Master Code) 5 = Arm/Disarm (Standard Secondary Code) 6 = Bypass Zones (Allows bypassing of zones) 7 = Open/Close Reporting (Leave OFF for Residential Accounts) 8 = If ON do not changeĤ. (If Master Code is not known see bottom of page)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |